750mm PU Traffic Warning Post

Material

The post is made of PU, this is a type of flexible material that recovers quickly after touching. Withstands more impact and extends the service life, weighing 0.85 kgs each.

Usage

In the city intersections, sidewalks, buildings between the isolation, so that the driving motor vehicles play a warning role, once hit will not cause a second injury. Red and white, Orange and white colors are eye-catching and obvious during the day, and the lattice set at night can reflect a dazzling light to remind drivers of the attention.

Setting position

In the roadside access road (generally a group of two), to attract the attention of pedestrians.
The high embankment section, in order to safe driving set.
Bridges (generally short bridges) at both ends of the bridge head, set by group.

Features

Resistant to water, oil and dust; can be placed outdoors for a long time
Striped reflective material design, enhance the warning effect.
Ultra-low center of gravity, weighted chassis design, wind load resistance 8, impact resistance.
Reflective brightness with reference to the European EN471 standard, reflective intensity of more than 300CPL.
Easy to carry, while easy to connect the isolation belt, isolation chain and isolation pole.

Installation method

1. Use a tape measure to measure the placement and then set up;
2. Connected to the power supply, first use the electric drill to align the screw holes gently make an imprint, and then take away the warning column to align the imprint punching, the electric drill to hold the right, the depth should be about the same as the length of the screw.
3. From the new warning column, the screws are aligned with the insertion of the hammer into the final set of nuts torsion tight.