1100mm PU Traffic Warning Post

Material

The post is made of PU, this is a type of flexible material that recovers quickly after touching. Withstands more impact and extends the service life.

Features

Super flexible, not afraid of being crushed by the car, can be 45 degrees twisted and stepped on without deformation.

Good reflective properties, clearly outline the road outline.

Can be used with a variety of warning link, warning chain, warning tape to play a protective and isolation role.

Normal work in rain and snow.

Easy to install, less maintenance, even if the vehicle hit again will not cause a second injury.

Installation Location

Generally used for the isolation of roads, isolation and protection of property communities, classification and arrangement of parking spaces, municipal construction, isolation and protection of public activities, highway road toll gate, city road intersections, pedestrian intersections, temporary division of roads, division of dangerous or prohibited areas, for the ends of traffic rails, can be used in conjunction with disposable caution tape, warning chain, warning link, etc.

Installation method

1. Measure the placement with a tape measure, and then set up.

2. Connect the power supply, first use the electric drill to lightly mark the screw holes, then take away the warning post to mark the holes, the drill should be held correctly and the depth should be about the same as the length of the screws.

3. From the new warning post, align the screw, insert it with a hammer, and finally set the nut and twist it tight.